Special Service Tools for Gardner Diesel Engines
Crankcase: page 1 of 4

	Foot Nut Spanner Used to loosen and properly torque the cylinder foot nuts when the cylinder heads are removed.	LX, LXB
		G 1012

	Foot Nut Spanner Used to hand tighten the cylinder foot nuts. Made to length to prevent overtightening.	LW LX
		G 1057 G 1145

	Foot Nut Spanner Used to loosen and properly torque the cylinder foot nuts. Torque to 2340lbs.in. with spanner in line with torque wrench. This will give a true torque of 2500lbs.in.	LYT
		G 1125

	Grommet Puller Used to extract the water grommets from the crankcase.	ALL
		G 1013

	Chain Link Remover Used to remove link from timing and auxiliary chains.	ALL
		G 1014

page one | page two | page three | page four

more Crankcase products >>> back to main contents >>> PRINT THIS PAGE